I am not responsible for any problems you experience as a result of trying to do anything described here. The hack documented here worked fine for me but may not work for you far any number of reasons.

The method of attaching the shoulder belt may not be acceptable for your PCA region. I know it's ok with the Chicago PCA region for Drivers Ed events, but not for Club Racing. The better way of attaching the shoulder belts is to use longer belts and attach them to the rear seat seatbelt bolts.

I purchased a Brey-Krause harness bar and set of belts from a local Porsche racing supply shop called Northstar Motorsports. The harness is probably the first thing you should install in your car if you plan to do drivers ed events. Safety is very important, but I find the harness helps keep me firmly planted in the seat as I'm flying around the turns.

I have a similar harness already installed in my Boxster. I've always wanted a Hotlap system, and now that I have a harness bar, I have someplace to mount it!

Before installing the harness yourself, you will need the following items:

• Coming soon.

Click on thumbnail to view full-size image
The Brey-Krause harness bar went in pretty easily. Viewed: 174 times.	The Sabelt shoulder belts simply wrap around the bar. See the warning at the top of this page. Viewed: 287 times.	The Hotlap receiver mounts perfectly on the harness bar using some huge zip ties. Viewed: 143 times.
I replaced the outboard seatbelt bolt with this eye-bolt. Viewed: 128 times.	The outboard lap belt now clips on easily. Viewed: 147 times.	I ended up having Fischer Motors put in these eye-bolts on both sides to connect the inboard submarine belt. Viewed: 189 times.
This is how it looks with the sub belt attached and the floor matts back in. Viewed: 161 times.	I had to permanently attach the inboard lap belt using the existing bolt. Viewed: 127 times.	The seat will still slide all the way forward as long as I fold back the belt. Viewed: 94 times.
The outboard sub belt attaches to the same eye-bolt as the lap belt. Viewed: 357 times.	Here is how it looks all done. Viewed: 397 times.	I put some racer's tape around the harness bar to keep the camera mount from scratching. Viewed: 154 times.

All that's left now is to adjust the length of the belts to make them comfortable and enjoy!!

Comments From People Like You! Sabelt 6-Point Harness : Greg's Dark Blue 911 - Hacks	add a comment
There are no user contributed comments for this page. Click add a comment to be the first.

All pictures and text are the property of Gregory Gulik unless otherwise specified. Please contact site owner if you would like permission to use these pictures for your own purposes or to make comments about anything you see here.